Portable
large sample Minispin Specification:
Specimen size: 50 mm cube - 25 are supplied with the instrument.
Integration time: Either 6 seconds (24 spins), or 24 seconds(120
spins).
Sensitivity/Noise level: 3.5 x 10-8 EMU.CM-3 (3.5 x I 0-5 A/m)
for 4 spins at the 24 sec's time constant.
|
Portable
large sample Minispin (Sample shown in the loading position)
|
|
|
Data output: On single 6-digit liquid crystal panel, with figures
8mm high. The display normally indicates the 'NORTH' component. The
'EAST' component is obtained by the press of a button. One (two) figures
after the decimal point are indicated for 6 sec's (24 sec's integration
time).The data is also available via an RS232 serial link that also
controls the instrument. .A USB adaptor is available.
Range: 4 decade attenuator.
Power supply: : Battery or mains 240 or 110 V. The life of the
batteries approx. 8 hours in continuous use. The batteries are rechargeable
from 240/110 V mains or a 12 V car battery. The power consumption is
8 W.
Data processing: A serial interface is fitted inside the Minispin
allows it to be controlled from a computer. The interface is a RS232,
working at 4800 bauds. It controls the Minispin and passes the results
back to the computer. If a notebook computer is used the kit becomes
fully portable.
Programs: Programs are provided in Windows.
Molspin
Ltd
